Recombinant SSB
收藏
产品编号 P7415-100μg
数量
¥ 575.00
产品包装:
100μg 500μg 1mg
产品简介
使用说明
相关文件下载
相关产品
相关论文
产品问答
Species Gene ID Accession Source Length MW Tag
1263584 P18310 E. coli 148aa 16.1kDa
About this protein
Name Recombinant SSB (Recombinant Single-stranded DNA Binding Protein; rSSB);重组单链DNA结合蛋白
Synonyms mitochondrial; MtSSB; single-stranded DNA binding protein 1
Purity >95% by SDS-PAGE and HPLC analyses.
Biological Activity Data Not Available.
Physical Appearance Sterile liquid.
Formulation 0.2μm filtered concentrated solution in 20mM Tris, pH7.4, 200mM NaCl, 50% Glycerol, 1mM EDTA, 0.5mM DTT.
Endotoxin Less than 0.1EU/μg of rSSB as determined by LAL method.
Reconstitution N/A
Category Others
Background Single-stranded DNA-binding protein, or SSB, binds to single-stranded regions of DNA to prevent premature annealing, to protect the single-stranded DNA from being digested by nucleases, and to remove secondary structure from the DNA to allow other enzymes to function effectively upon it. In molecular biology, SSB protein domain in bacteria are important in its function of maintaining DNA metabolism, more specifically DNA replication, repair and recombination. SSB proteins have been identified in organisms from viruses to humans. The only organisms known to lack them are thermoproteales, a group of extremophile archaea, where they have been displaced by the protein ThermoDBP. While many phage and viral SSBs function as monomers and eukaryotes encode heterotrimeric RPA (Replication Protein A), the best characterized SSB is that from the bacteria E. coli which, like most bacterial SSBs exists as a tetramer.
Amino Acid Sequence MEEKVGNLKP NMESVNVTVR VLEASEARQI QTKNGVRTIS EAIVGDETGR VKLTLWGKHA GSIKEGQVVK IENAWTTAFK GQVQLNAGSK TKIAEASEDG FPESSQIPEN TPTAPQQMRG GGRGFRGGGR RYGRRGGRRQ ENEEGEEE

包装清单:

产品编号 产品名称 包装
P7415-100μg Recombinant SSB 100μg
P7415-500μg Recombinant SSB 500μg
P7415-1mg Recombinant SSB 1mg
- 说明书 1份

保存条件:
-20℃或更低温度保存,至少一年有效。由于蛋白的每次冻融均会引起部分失活,所以首次配制成相应浓度的储存液后(请根据产品简介中Reconstitution一栏的信息配制储存液),须分装后-20℃或更低温度冻存,以避免反复冻融。
注意事项:
由于有些塑料管壁对某些蛋白有较强的吸附作用,溶液中的蛋白很容易粘附在管壁上,并且粘附后的蛋白很难与管壁分离。而载体蛋白(Carrier protein,如0.1% BSA等)的主要作用是预先封闭塑料管壁上的蛋白结合位点,使细胞因子或重组蛋白不会粘附于管壁。所以一定要使用产品简介中Reconstitution一栏的信息配制储存液。
本产品仅限于专业人员的科学研究用,不得用于临床诊断或治疗,不得用于食品或药品,不得存放于普通住宅内。
为了您的安全和健康,请穿实验服并戴一次性手套操作。

使用说明:
1. 收到产品后请立即按照说明书推荐的条件保存。
2. 将本产品和自行准备的产品简介中Reconstitution一栏推荐的配制储存液平衡至室温。
3. 除非特别注明,碧云天相关产品均为冻干粉,由于微量的蛋白在冻干过程中沉积在管内,形成很薄或不可见的蛋白层,所以在打开盖子前,我们建议在离心机中约8,000-12,000×g离心10-30秒,使附着在盖子或容器壁上的蛋白聚集于容器底部。
4. 加入适量推荐的配制储存液,达到Reconstitution一栏中推荐的浓度。请勿用vortex剧烈振荡或移液器剧烈吹打,以免蛋白变性而失活。
5. 在室温下溶解15-30分钟。
6. 如果看不到蛋白粉末,并担心蛋白仍然粘附在盖子或容器壁上,可以吸取液体轻轻润洗盖子和容器壁以促进溶解。对于溶解的体积相对比较大的情况,可使用BeyoVortex™基础型旋转混匀仪(E6800)或其它适当摇床或手动轻轻上下颠倒以促进溶解。
7. 如需分装,每管体积通常不小于10μl,并按说明书中推荐的储存液保存条件进行保存。
8. 具体的最佳工作浓度请自行参考相关文献,或者根据实验目的,以及特定细胞和动物,通过实验进行摸索和优化。
相关产品请点击如下按钮:
使用本产品的文献: